cansas1d-template.xml - Revision history

Jemian: point to subversion

2008-03-22T18:14:31Z

point to subversion

Jemian: moved all documentation to documentation page, eliminated nonsense elements from template (the template does not show the rules but is used to test them)

2008-01-25T19:34:31Z

moved all documentation to documentation page, eliminated nonsense elements from template (the template does not show the rules but is used to test them)

Show changes

Jemian: reverted Idata back to [1..inf] -- MUST have at least one data point since this is the main reason for this format

2008-01-11T19:13:04Z

reverted Idata back to [1..inf] -- MUST have at least one data point since this is the main reason for this format

← Older revision		Revision as of 19:13, 11 January 2008
Line 30:		Line 30:
	<!--* SASdata: [1..1] required, contains all the SAS data for this SAS scan -->		<!--* SASdata: [1..1] required, contains all the SAS data for this SAS scan -->
	<Idata>		<Idata>
	<!--* Idata: [0..inf] row of SAS data -->		<!--* Idata: [1..inf] row of SAS data -->
	<Q unit="1/A"><!--* Q: [1..1] Q value for this row -->0.02</Q>		<Q unit="1/A"><!--* Q: [1..1] Q value for this row -->0.02</Q>
	<I unit="1/cm"><!--* I: [1..1] Intensity value for this row -->1000</I>		<I unit="1/cm"><!--* I: [1..1] Intensity value for this row -->1000</I>

Ajj at 19:43, 7 January 2008

2008-01-07T19:43:53Z

← Older revision		Revision as of 19:43, 7 January 2008
Line 3:		Line 3:
	<SASroot xmlns="http://www.smallangles.net/cansas1d"		<SASroot xmlns="http://www.smallangles.net/cansas1d"
	xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"		xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
	xsi:schemaLocation="http://www.smallangles.net/cansas1d/ cansas1d.xsd"		xsi:schemaLocation="http://www.smallangles.net/cansas1d/ http://www.smallangles.net/cansas1d/1.0/cansas1d.xsd"
	version="1.0">		version="1.0">
	<!--		<!--

122.104.193.123: changed run to be [1..inf]

2008-01-06T22:05:16Z

changed run to be [1..inf]

Jemian at 16:32, 5 January 2008

2008-01-05T16:32:19Z

← Older revision		Revision as of 16:32, 5 January 2008
Line 26:		Line 26:
	<!--* SASentry: [1..inf] a single SAS scan -->		<!--* SASentry: [1..inf] a single SAS scan -->
	<Title><!--* [0..1] title of this SAS scan --></Title>		<Title><!--* [0..1] title of this SAS scan --></Title>
	<Run><!--* [0..1] run (number or text) of this SAS scan --></Run>		<Run><!--* [0..inf] run (number or text) of this SAS scan --></Run>
	<SASdata name="this name is optional">		<SASdata name="this name is optional">
	<!--* SASdata: [1..1] required, contains all the SAS data for this SAS scan -->		<!--* SASdata: [1..1] required, contains all the SAS data for this SAS scan -->

Jemian at 19:33, 4 January 2008

2008-01-04T19:33:07Z

← Older revision		Revision as of 19:33, 4 January 2008
Line 124:		Line 124:
	</beam_center>		</beam_center>
	<pixel_size name="this name is optional">		<pixel_size name="this name is optional">
	<!--* ~~beam_center~~: [0..1] pixel size on detector -->		<!--* pixel_size: [0..1] pixel size on detector -->
	<x unit="mm"><!--* x: [0..1] horizontal -->5.0</x>		<x unit="mm"><!--* x: [0..1] horizontal -->5.0</x>
	<y unit="mm"><!--* y: [0..1] vertical -->5.0</y>		<y unit="mm"><!--* y: [0..1] vertical -->5.0</y>

Jemian at 19:31, 4 January 2008

2008-01-04T19:31:55Z

← Older revision		Revision as of 19:31, 4 January 2008
Line 112:		Line 112:
	</offset>		</offset>
	<orientation name="this name is optional">		<orientation name="this name is optional">
	<!--* ~~offset~~: [0..1] detector rotation -->		<!--* orientation: [0..1] detector rotation -->
	<roll unit="degree"><!--* roll: [0..1] detector roll -->0.00</roll>		<roll unit="degree"><!--* roll: [0..1] detector roll -->0.00</roll>
	<pitch unit="degree"><!--* pitch: [0..1] detector pitch -->0.00</pitch>		<pitch unit="degree"><!--* pitch: [0..1] detector pitch -->0.00</pitch>

Jemian: template completed

2008-01-04T17:45:15Z

template completed

← Older revision		Revision as of 17:45, 4 January 2008
Line 22:		Line 22:
	http://www.smallangles.net/wgwiki/index.php/cansas1d_documentation#Validation_of_XML_against_the_Schema		http://www.smallangles.net/wgwiki/index.php/cansas1d_documentation#Validation_of_XML_against_the_Schema
	-->		-->
	<!--* SASroot: [1..1] required name of the type of data in this file -->		<!--* SASroot: [1..1] required name of the type of data in this file, 'version="1.0"' is a required attribute -->
	<SASentry name="this name is optional">		<SASentry name="this name is optional">
	<!--* SASentry: [1..inf] a single SAS scan -->		<!--* SASentry: [1..inf] a single SAS scan -->
Line 58:		Line 58:
	<yaw unit="degree"><!--* yaw: [0..1] sample yaw -->0.020</yaw>		<yaw unit="degree"><!--* yaw: [0..1] sample yaw -->0.020</yaw>
	</orientation>		</orientation>
	~~<offset_angle unit="degrees">~~
	~~<!--* offset_angle: [0..1] sample offset_angle -->~~
	~~0.00~~
	~~<!-- *************** IS THIS NOW CONSIDERED IN ORIENTATION? ****************** -->~~
	~~<!-- *************** CAN THIS BE REMOVED? ************************************ -->~~
	~~</offset_angle>~~
	<details>		<details>
	<!--* details: [0..inf] free form description of the sample -->		<!--* details: [0..inf] free form description of the sample -->
Line 105:		Line 99:
	</SAScollimation>		</SAScollimation>
	<SASdetector name="this name is optional">		<SASdetector name="this name is optional">
	<!--* SASdetector: [1..1] description of the detector -->		<!--* SASdetector: [1..inf] description of the detector -->
	<name><!--* name: [1..1] detector name -->fictional hybrid</name>		<name><!--* name: [1..1] detector name -->fictional hybrid</name>
	<SDD unit="m">		<SDD unit="m">
Line 135:		Line 129:
	<z unit="mm"><!--* z: [0..1] this is allowed but has no meaning for SAS -->0.00</z>		<z unit="mm"><!--* z: [0..1] this is allowed but has no meaning for SAS -->0.00</z>
	</pixel_size>		</pixel_size>
	<~~slitlength~~ unit="1/A"><!--* slitlength: [0..1] slitlength at detector -->0.05</~~slitlength~~>		<slit_length unit="1/A"><!--* slitlength: [0..1] slitlength at detector -->0.05</slit_length>
	</SASdetector>		</SASdetector>
	</SASinstrument>		</SASinstrument>

Jemian: created the XML template

2008-01-04T00:50:11Z

created the XML template

New page

<pre>
<?xml version="1.0"?>
<SASroot xmlns="http://www.smallangles.net/cansas1d"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.smallangles.net/cansas1d/ cansas1d.xsd"
version="1.0">


<SASentry name="this name is optional">

<Title></Title>
<Run></Run>
<SASdata name="this name is optional">

<Idata>

<Q unit="1/A">0.02</Q>
<I unit="1/cm">1000</I>
<Qdev unit="1/A">0.01</Qdev>
<Idev unit="1/cm">3</Idev>
<Qfwhm unit="1/A"></Qfwhm>
<Qmean unit="1/A"></Qmean>
<Shadowfactor></Shadowfactor>
</Idata>
</SASdata>
<SASsample name="this name is optional">

<ID>SI600-new-long</ID>
<thickness unit="mm">1.03</thickness>
<transmission>0.327</transmission>
<temperature unit="C">0.0000</temperature>
<position name="this name is optional">

<x unit="mm">10.00</x>
<y unit="mm">0.00</y>
<z unit="mm">0.00</z>
</position>
<orientation name="this name is optional">

<roll unit="degree">22.5</roll>
<pitch unit="degree">0.020</pitch>
<yaw unit="degree">0.020</yaw>
</orientation>
<offset_angle unit="degrees">

0.00


</offset_angle>
<details>

http://chemtools.chem.soton.ac.uk/projects/blog/blogs.php/bit_id/2720
</details>
</SASsample>
<SASinstrument name="this name is optional">

<name>canSAS instrument</name>
<SASsource>

<radiation>neutron</radiation>
<beam_size name="this name is optional">

<x unit="mm">12.00</x>
<y unit="mm">12.00</y>
<z unit="mm">0.00</z>
</beam_size>
<beam_shape>

disc
</beam_shape>
<wavelength unit="A">6.00</wavelength>
<wavelength_min unit="nm">0.22</wavelength_min>
<wavelength_max unit="nm">1.00</wavelength_max>
<wavelength_spread unit="percent">14.3</wavelength_spread>
</SASsource>
<SAScollimation name="this name is optional">

<distance unit="m">11.000</distance>
<aperture name="source" type="radius">

<size>

<x unit="mm">50</x>
<y unit="mm">2.1</y>
<z unit="mm">0.00</z>
</size>
<distance unit="mm">15.0</distance>
</aperture>
</SAScollimation>
<SASdetector name="this name is optional">

<name>fictional hybrid</name>
<SDD unit="m">

4.150
</SDD>
<offset name="this name is optional">

<x unit="mm">322.64</x>
<y unit="mm">327.68</y>
<z unit="mm">0.00</z>
</offset>
<orientation name="this name is optional">

<roll unit="degree">0.00</roll>
<pitch unit="degree">0.00</pitch>
<yaw unit="degree">0.00</yaw>
</orientation>
<beam_center name="this name is optional">

<x unit="mm">322.64</x>
<y unit="mm">327.68</y>
<z unit="mm">0.00</z>
</beam_center>
<pixel_size name="this name is optional">

<x unit="mm">5.0</x>
<y unit="mm">5.0</y>
<z unit="mm">0.00</z>
</pixel_size>
<slitlength unit="1/A">0.05</slitlength>
</SASdetector>
</SASinstrument>
<SASprocess name="this name is optional">

<name>spol</name>
<date>04-Sep-2007 18:35:02</date>
<description></description>
<term name="parameterName" unit="mm">

10.000
</term>
<term name="MASK_file">USER:MASK.COM</term>
<SASprocessnote name="this name is optional">


AvA1 0.0000E+00 AsA2 1.0000E+00 XvA3 1.0526E+03 XsA4 5.2200E-02 XfA5 0.0000E+00
</SASprocessnote>
</SASprocess>
<SASnote name="this name is optional">

</SASnote>
</SASentry>
</SASroot>
</pre>

← Older revision		Revision as of 22:05, 6 January 2008
Line 25:		Line 25:
	<SASentry name="this name is optional">		<SASentry name="this name is optional">
	<!--* SASentry: [1..inf] a single SAS scan -->		<!--* SASentry: [1..inf] a single SAS scan -->
	<Title><!--* [0..1] title of this SAS scan --></Title>		<Title><!--* [1..1] title of this SAS scan --></Title>
	<Run><!--* [0..inf] run (number or text) of this SAS scan --></Run>		<Run><!--* [1..inf] run (number or text) of this SAS scan --></Run>
	<SASdata name="this name is optional">		<SASdata name="this name is optional">
	<!--* SASdata: [1..1] required, contains all the SAS data for this SAS scan -->		<!--* SASdata: [1..1] required, contains all the SAS data for this SAS scan -->
	<Idata>		<Idata>
	<!--* Idata: [1..inf] row of SAS data -->		<!--* Idata: [0..inf] row of SAS data -->
	<Q unit="1/A"><!--* Q: [1..1] Q value for this row -->0.02</Q>		<Q unit="1/A"><!--* Q: [1..1] Q value for this row -->0.02</Q>
	<I unit="1/cm"><!--* I: [1..1] Intensity value for this row -->1000</I>		<I unit="1/cm"><!--* I: [1..1] Intensity value for this row -->1000</I>
Line 45:		Line 45:
	<thickness unit="mm"><!--* thickness: [0..1] sample thickness -->1.03</thickness>		<thickness unit="mm"><!--* thickness: [0..1] sample thickness -->1.03</thickness>
	<transmission><!--* transmission: [0..1] sample transmission -->0.327</transmission>		<transmission><!--* transmission: [0..1] sample transmission -->0.327</transmission>
	<temperature unit="C"><!--* ~~thickness~~: [0..1] sample temperature -->0.0000</temperature>		<temperature unit="C"><!--* temperature: [0..1] sample temperature -->0.0000</temperature>
	<position name="this name is optional">		<position name="this name is optional">
	<!--* position: [0..1] sample translation, name is optional -->		<!--* position: [0..1] sample translation, name is optional -->